ASME B31.3
Process piping
ASME
B31.8-2018 Gas Transmission and Distribution Piping System
BS 7159 Code
of practice for design and construction of glass reinforced plastics (GRP) piping
systems for individual plants or sites
NACE MR0175, Sulfide stress cracking resistant metallic
materials for oilfield equipment.
ASME B36.10M Welded and Seamless Wrought Steel
ASME B16.5
Pipe Flanges and Flanged Fittings
ASME Sect.
VIII Div. 1 Rules for Construction of Pressure Vessels
ASME B73.1
Specification for Horizontal End Suction Centrifugal Pumps for
Chemical
Process
ASME B73.3
Specification for Sealless Horizontal End Suction Metallic Centrifugal
Pumps for
Chemical Process
Manufacturers Standardization Society of the Valve and
Fittings Industry (MSS)
SP-58 Pipe Hangers and Supports - Materials, Design and
Manufacture
SP-69 Pipe Hangers and Supports - Selection and
Application
ASME Section V Nondestructive Examination 无损检验
ASME Section VIII
Rules for Construction of Pressure Vessels 压力容器建造规则
ASME Section IX Welding and Brazing Qualification 焊接和铜焊资格
ASTM
F1545-15a标准塑料衬里钢管、管件及法兰的要求规范
API 598 Valve
Inspection and Testing
ASME B16.34
Valves- Flanged, Threaded, and Welding Ends
ASME B16.38, Gas Distribution Valves
API 539, Flanged Ductile Iron Plug Valves
API 594 Check
Valves: Wafer, Wafer-Lug, and Double Flanged Type
API 595,
Flanged Cast Iron Gate Valves
API 599, Flanged or Welded Steel Plug Valves
API 600, Flanged or Welded Steel Gate Valves
API 602, Compact Carbon Steel Valves; Classes 800 and
1500
API 603, Flanged Cast Corrosion Resistant Steel Gate
Valves; Class 150
API 604, Flanged Ductile Iron Gate Valves
API 606, Compact Extended Carbon Steel Valves; Classes
800 and 1500
API 608, Flanged or Welded Metal Ball Valves
API 609, Lug or Wafer Type Butterfly Valves
MSS SP-42, Flanged or Welded Corrosion Resistant Gate,
Globe, Angle and Check Valves
MSS SP-67, Butterfly Valves
MSS SP-68, High Pressure Offset Seat Butterfly Valves
MSS SP-70, Flanged and Threaded Cast Iron Gate Valves
MSS SP-71, Flanged and Threaded Cast Iron Swing Check
Valves
MSS SP-72, Flanged and Welded Ball Valves for General
Service
MSS SP-78, Flanged and Threaded Cast Iron Plug Valves
MSS SP-80, Bronze Gate, Globe, Angle and Check Valves
MSS SP-81, Flanged Bonnetless Stainless Steel Knife
Gate Valves
MSS SP-84, Socket Welded and Threaded Valves
MSS SP-85, Flanged and Threaded Cast Iron Globe and
Angle Valves
MSS SP-88, Diaphragm Valves
ASME B16.5
Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch Standard
ASME B16.20 Metallic Gaskets for Pipe Flanges (Ring-Joint, Spiral-Wound,
and Jacketed)
ASME B16.21 Nonmetallic Flat Gaskets for Pipe Flanges
BS EN 1092-1:2018 Flanges and their joints - Circular flanges for pipes,
valves, fittings and accessories, PN designated -Part 1: Steel flanges
EN 1514-1:1997, Flanges and their joints - Dimensions of gaskets for
PN-designated flanges - Part 1: Non-metallic flat gaskets with or without
inserts
EN 1514-2:2014, Flanges and their joints - Gaskets for PN-designated
flanges - Part 2: Spiral wound gaskets for use with steel flanges
EN 1515-2:2001, Flanges and their joints - Bolting - Part 2:
Classification of bolt materials for steel flanges, PN designated
EN 1515-4:2009, Flanges and their joints - Bolting - Part 4: Selection
of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN 1591-1:2013, Flanges and their joints - Design rules for gasketed
circular flange connections - Part 1: Calculation
EN 1708-1:2010, Welding - Basic welded joint details in steel - Part 1:
Pressurized components
EN 10021:2006, General technical delivery conditions for steel products
EN 10028-2:2017, Flat products made of steels for pressure purposes -
Part 2: Non-alloy and alloy steels with specified elevated temperature
properties
EN 10028-3:2017, Flat products made of steels for pressure purposes -
Part 3: Weldable fine grain steels, normalized
EN 10028-4:2017, Flat products made of steels for pressure purposes -
Part 4: Nickel alloy steels with specified low temperature properties
EN 10028-7:2016, Flat products made of steels for pressure purposes -
Part 7: Stainless steels
EN 10160:1999, Ultrasonic testing of steel flat product of thickness
equal or greater than 6 mm (reflection method)
EN 10204:2004, Metallic products - Types of inspection documents
EN 10213:2007+A1:2016, Steel castings for pressure purposes
EN 10216-2:2013, Seamless steel tubes for pressure purposes - Technical
delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified
elevated temperature properties
EN 10216-3:2013, Seamless steel tubes for pressure purposes - Technical
delivery conditions - Part 3: Alloy fine grain steel tubes
EN 10216-4:2013, Seamless steel tubes for pressure purposes - Technical
delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified
low temperature properties
EN 10216-5:2013, Seamless steel tubes for pressure purposes - Technical
delivery conditions - Part 5: Stainless steel tubes
EN 10217-2:2002, Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes
with specified elevated temperature properties
EN 10217-3:2002, Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 3: Alloy fine grain steel tubes
EN 10217-7:2014, Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 7: Stainless steel tubes
EN 10220:2002, Seamless and welded steel tubes - Dimensions and masses
per unit length
EN 10222-2:2017, Steel forgings for pressure purposes - Part 2: Ferritic
and martensitic steels with specified elevated temperature properties
EN 10222-3:2017, Steel forgings for pressure purposes - Part 3: Nickel
steels with specified low temperature properties
EN 10222-4:2017, Steel forgings for pressure purposes - Part 4: Weldable
fine grain steels with high proof strength
EN 10222-5:2017, Steel forgings for pressure purposes - Part 5:
Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10226-3:2005, Pipes threads where pressure tight joint are made on
the threads - Part 3: Verification by means of limit gauges
EN 10272:2016, Stainless steel bars for pressure purposes
EN 10273:2016, Hot rolled weldable steel bars for pressure purposes with
specified elevated temperature properties
EN 12516-1:2014, Industrial valves - Shell design strength - Part 1:
Tabulation method for steel valve shells
EN 13445-3:2014, Unfired pressure vessels - Part 3: Design
EN 13480-3:2017, Metallic industrial piping - Part 3: Design and
calculation
EN 22768-1:1993, General tolerances - Part 1: Tolerances for linear and
angular dimensions without individual tolerance indications (ISO 2768-1)
EN ISO 148-1:2016, Metallic materials - Charpy pendulum impact test -
Part 1: Test method (ISO 148-
1:2016)
EN ISO 887:2000, Plain washers for metric bolts, screws and nuts for
general purposes - General plan
(ISO 887:2000)
EN ISO 3452-1:2013, Non-destructive testing - Penetrant testing - Part
1: General principles (ISO 3452-
1:2013)
EN ISO 4014:2011, Hexagon head bolts - Product grades A and B (ISO
4014:2011)
EN ISO 4287:1998, Geometrical product specifications (GPS) - Surface
texture: Profile method - Terms,
definitions and surface texture parameters (ISO 4287:1997)
EN ISO 5817:2014, Welding - Fusion-welded joints in steel, nickel,
titanium and their alloys (beam welding
excluded) - Quality levels for imperfections (ISO 5817:2014)
EN ISO 6892-1:2016, Metallic materials - Tensile testing - Part 1:
Method of test at room temperature
(ISO 6892-1:2016)
EN ISO 9606-1:2017, Qualification testing of welders - Fusion welding -
Part 1: Steels (ISO 9606-1:2012,
including Cor 1:2012 and Cor 2:2013)
EN ISO 9692-2:1998, Welding and allied processes - Joint preparation -
Part 2: Submerged arc welding of
steels (ISO 9692-2:1998)
EN ISO 9712:2012, Non-destructive testing - Qualification and
certification of NDT personnel
(ISO 9712:2012)
EN ISO 10675-1:2016, Non-destructive testing of welds - Acceptance
levels for radiographic testing - Part
1: Steel, nickel, titanium and their alloys (ISO 10675-1:2016)
EN ISO 11666:2010, Non-destructive testing of welds - Ultrasonic testing
- Acceptance levels
(ISO 11666:2010)
EN ISO 14732:2013, Welding personnel - Qualification testing of welding
operators and weld setters for
mechanized and automatic welding of metallic materials (ISO 14732:2013)
EN ISO 15614-1:2017, Specification and qualification of welding
procedures for metallic materials -
Welding procedure test - Part 1: Arc and gas welding of steels and arc
welding of nickel and nickel alloys
(ISO 15614-1:2004)
EN ISO 15614-13:2012, Specification and qualification of welding
procedures for metallic materials -
Welding procedure test - Part 13: Upset (resistance butt) and flash
welding (ISO 15614-13:2012)
EN ISO 17636-1:2013, Non-destructive testing of welds - Radiographic
testing - Part 1: X- and gamma-ray
techniques with film (ISO 17636-1:2013)
EN ISO 17636-2:2013, Non-destructive testing of welds - Radiographic
testing - Part 2: X- and gamma-ray
techniques with digital detectors (ISO 17636-2:2013)
EN ISO 17637:2016, Non-destructive testing of welds - Visual testing of
fusion-welded joints
(ISO 17637:2016)
EN ISO 17638:2016, Non-destructive testing of welds - Magnetic particle
testing (ISO 17638:2016)
EN ISO 17640:2010, Non-destructive testing of welds - Ultrasonic testing
- Techniques, testing levels, and
assessment (ISO 17640:2010)
EN ISO 23277:2015, Non-destructive testing of welds - Penetrant testing
of welds - Acceptance levels
(ISO 23277:2006)
EN ISO 23278:2015, Non-destructive testing of welds - Magnetic particle
testing of welds - Acceptance
levels (ISO 23278:2006)
ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the
threads - Part 1: Dimensions,
tolerances and designation
ISO 4200:1991, Plain end steel tubes, welded and seamless - General
tables of dimensions and masses per
unit length
ASME B16.9
Factory-Made Wrought Buttwelding Fittings
ASME B16.11
双承口管箍
ASTM
A733-2016 Standard Specification for Welded and Seamless Carbon Steel and
Austenitic Stainless Steel Pipe Nipples
API 674 固定排量泵－往复式
ISO
14692-2:2017 Petroleum and natural gas industries — Glass-reinforced plastics
(GRP) piping — Part 2: Qualification and manufacture
PIP (Process Industry Practices)
PIP PNC00001
Pipe Support Criteria for ASME B31.3 Metallic Piping
PIP PNC00004
Piping Flexibility Analysis Criteria for ASME B31.3 Metallic Piping
PIP PNC00005
Design of ASME B31.3 Metallic Piping Systems
PIP PNFS0001
Pipe Support Details
PIP PNFS0001
Miscellaneous Pipe Support Details
PIP RESE002
Allowable Piping Loads on Rotating Machinery Nozzles
PIP REEE002
Benchm arking of Reliability Indicators for Rotating Machinery
PIP
REIE686/API RP 686 Recommended Practices for Machinery Installation and
Installation Design
PIP PNSC0003
Process Unit and Offsites Layout Guide
PIP PNSC0025
Piping Flexibility Analysis
PIP STS05120
Fabrication of Structural and Miscellaneous Steel Specification
PIP PNE00002
Piping Material Specification Selection, Development, and Application
Guidelines